Car Garage Tools Vehicle Lift

• Customization: Available
• Type: Double Cylinder Hydraulic Lift
• Driving Type: Hydraulic
• Model NO.: 7214
• Certification: CE, ISO
• Driving Motor Number of Mechanical Lift: 1
• Shearing Lift Type: 2-Post
• Condition: New
• Design: Two Post
• Transport Package: Steel Shelf
• Specification: 2840*530*730mm
• Trademark: EOUNICE
• Origin: China
• HS Code: 842542
• Package Size: 285.00cm * 53.00cm * 73.00cm
• Package Gross Weight: 668.000kg

Product Description

Packaging & Delivery

Package Size

385.00cm * 50.00cm * 75.00cm

Package Gross Weight

690.000kg

Product Description

TECHNICAL DATA:

Model	Lifting Capacity	Lifting Time	Overall Height	Lifting Height	Short Arm Length	Long Arm Length	Overall Width	Width Between Columns	Gross Weight
ON-7214	4,200kgs (9,259LBS)	≤55S	3892mm (153 1/4")	1920mm (75 9/16")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	665kg (1466LBS)
How to unlock safety device		Eounice 7214 model: pull the string of both side
ON-7214E	4,200kgs (9,259LBS)	≤55S	3892mm (153 1/4")	1920mm (75 9/16")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	668kg (1,473LBS)
How to unlock safety device		Eounice E range product: press the "unlock"buttom
ON-7214ZK	4,200kgs (9,259LBS)	≤55S	3835mm (151")	1920mm (75 9/16")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	645kg (1422LBS)
How to unlock safety device		Eounice 7214ZK model: pull the string of both side
ON-7214DK	4,200kgs (9,259LBS)	≤55S	3835mm (151")	1920mm (75 9/16")	580mm (22 13/16'')	1140mm (44 7/8'')	3410mm (134 1/4")	2850mm (112 13/64")	685kg (1,510LBS)
ON-7214DK-4.5	4,500kgs (9,920LBS)	≤55S	3835mm (151")	1920mm (75 9/16")	580mm (22 13/16'')	1140mm (44 7/8'')	3410mm (134 1/4")	2850mm (112 13/64")	710kg (1,565LBS)
ON-7214DT-45	4,500kgs (9,920LBS)	≤55S	3624mm (142 11/16")	1815mm (71 7/16")	580mm (22 13/16'')	1140mm (44 7/8'')	3420mm (134 5/8")	2850mm (112 13/64")	739kg (1,629LBS)
ON-7214DTK	4,500kgs (9,920LBS)	≤55S	3835mm (150 63/64")	1900mm (74 51/64")	700-1060mm (27 9/16"-41 3/4'')	845-1350mm (33 1/4"-53 1/8'')	3560mm (140 3/16")	3000mm (118 1/8")	702kgs (1,548LBS)
ON-7214DT-45H	4,500kgs (9,920LBS)	≤55S	3874mm (152 1/2")	1900mm (74 51/64")	580mm (22 13/16'')	1140mm (44 7/8'')	3420mm (134 5/8")	2850mm (112 13/64")	769kg (1695LBS)
How to unlock safety device		Eounice D range product: push the rod down

PRODUCT INTRODUCE 

1. 4,200Kg (9,259LBS.) lifting capacity.
2. The width between columns is 2850mm, and width of the drive through is 2580mm, it is suitable for most vehicles..
3. Manual safety lock release.
4. Max height limit switch to ensure the cylinders work within the stroke.
5. The width of the column base plate is 500mm, the contact area with the ground is large, and the lift is more stable and reliable.
6. The upper beam maximum height is 3835mm, the usable helght is 3706mm, which is more suitable for the lifting of high-top vehicles.

MAIN FEATURES

1. 4200KG/4500KG lifting capacity, tested to meet 120% dynamic and 150% static load professional test standards.
2. Independent control box, 24V low voltage electrical control system.
3. There are double insurance of manual safety and cable breaking safety inside the cross beam, and the reset device adopts pressure spring and guide bar structure, even if the spring is broken due to the reason of guide bar, it can still be effective to ensure the safety of use.
4. The main structural parts are welded by robot with good welding consistency, high strength and beautiful welding seam.
5. Structural parts are sprayed with imported powder, using imported spraying equipment spraying, high temperature curing, can ensure strong adhesion, bright color and beautiful.
6. Hydraulic cylinders with volume synchronization,to ensure lifting arm synchronization and stable.
7. Adopting high-quality hydraulic and electrical and electronic components from ltaly, Germany, japan, etc.
8. The position of the steering wheel for the front wheels is adjustable and the extended side sliding plates can adapt to more types of vehiclemodels.
9. With hydraulic safety lock and mechanical spline safety claw system, automatic engaged during descending process, can lock the positionwith mechanic spline safety lock by locking operation, to ensure safety and reliability.
10. Two side manual lock release and 24v low -voltage operation device.
11. Standard with 2 two-stage lifting arms and 2 three-stage lifting arms, with fast inserting and adjustable screw-up rubber pads,the minimum height from the ground is only95mm,which is suitable for vehicles with different chassis.
12. The pulley in the column is installed toward the side ofthe cylinder, even if the circlip falls off, it can effectively prevent the puley from faling off of the axis.
13. A device preventing the pulley and steel wire rope from getting off is installed on the top beam ..
14. The slider made from ultra wear-resisting high molecular material with limit plate is used, no filing of lubrication oil needed, the service life is long, the operation is stable and reliable, and the slider can be replaced and adiusted auickly.
15. Aviation wire rope which is soft and with good linearity and small diameter tolerance is adopted to guarantee the synchronization of thecarriage of both sides and satisfies the application requirements better..
16. The hydraulic cylinder connector is equipped with anti-surge valve, which can effectively prevent accidents of oil pipes breaking due to highhydraulic pressure.

OUR FACTORY:  

Seamless Laser Cutting

1. High Accuracy and Precision Cuts 
2. Causes No Damage Or Warping, Even to Thin Materials
3. Higher Sheet Utilization with Less Waste & Low Power Consumption

Robotic Welding Technology

1. Seamless Appearance
2. High Strength 

Powder Coating

1. Imported Powder and Sprayers
2. High Adhesion
3. Clear Powdering Effect
4. Aesthetically Smooth Appearance.

Packing and Shipping Examples
2 post lift and 4 post lift are steel frame packed while scissor lifts are packing in ply-wood boxes with steel outlines. The control console are packed in ply-wood boxes.Strong packing guarantees the delivery in perfect condition into your hand.



Standardization is in Our Heart while Certifications are for your Eyes.


Getting Closer to You


FAQ

1. Why should I choose EOUNICE car lift?

1. 20 years of techniques research+TUV, CE, ISO9001, CCPC certifications
2. 60,000m² lift production plant
3. Professional cost-effective 50+ automatic machines & production lines
4. Top quality raw materials from the finest plants
5. Competitive prices with higher quality
6. Own factory with stable supply and target for long term cooperation
7. Treat n respect customer as good friends, no matter where they come from.

 
2. How safe are EOUNICE post car lift?
EOUNICE car lifts have been tested and CE certified for safety . They also meet the American and Australian Standard. 

3. Are EOUNICE car lifts designed for commercial use?
All of our lifts can be used in commercial applications without any problems.
 
4. Do you offer any custom designs?
Sure, EOUNICE provides OEM/ODM services. We can build the molds and fixtures and produce according to your samples or technical drawings.

5. How about your delivery time?
Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

6.Does my lift come with the necessary anchor bolts and/or hardware to mount it to the floor?
All EOUNICE lifts are shipped with the necessary anchors required for mounting the unit to your floor.
  

7.What is the ceiling height required for a EOUNICE lift?
The required ceiling height depends on the lift model, as well as the intended vehicle. Please refer to the product specification page for each product for further details. Or contact us for advice.

8.Are car lifts available in different voltages?
Other (unlisted) voltages may be available upon request. Voltage options vary between models.

9.Do car lifts require maintenance?
A simple monthly checklist is perhaps the most you'll do on a regular basis, aside from common-sense visual inspections you'll do every time you lift and lower your vehicles. Cables need to be maintained, as do hydraulic systems.