Two-Post Vehicle Maintenance Lift on-7214

• Customization: Available
• Type: Double Cylinder Hydraulic Lift
• Driving Type: Hydraulic
• Model NO.: 7214
• Certification: CE, ISO
• Driving Motor Number of Mechanical Lift: 1
• Shearing Lift Type: 2-Post
• Condition: New
• Design: Two Post
• Transport Package: Iron Shelf
• Specification: 3850*500*750
• Trademark: EOUNICE
• Origin: China
• HS Code: 842542
• Package Size: 385.00cm * 50.00cm * 75.00cm
• Package Gross Weight: 690.000kg

Product Description

Packaging & Delivery

Package Size

385.00cm * 50.00cm * 75.00cm

Package Gross Weight

690.000kg

Product Description

TECHNICAL DATA:

Model	Lifting Capacity	Lifting Time	Overall Height	Lifting Height	Short Arm Length	Long Arm Length	Overall Width	Width Between Columns	Gross Weight
ON-7214Z	4,200kgs (9,259LBS)	≤60S	3700mm 145 43/64")	1900mm (74 51/64")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	652kgs (1,437LBS)
ON-7214ZD	4,000kgs (8,818LBS)	≤60S	3875mm 152 9/16")	1900mm (74 51/64")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	690kgs (1,521LBS)
ON-7214E	4,200kgs (9,259LBS)	≤60S	3700mm 145 43/64")	1900mm (74 51/64")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	690kgs (1,521LBS)
ON-7214DTK	4,500kgs (9,920LBS)	≤60S	3835mm 150 63/64")	1900mm (74 51/64")	740-1150mm (29 9/64"-45 9/32'')	890-1390mm (35 3/64"-54 23/32'')	3410mm (134 1/4")	2850mm (112 13/64")	690kgs (1,521LBS)

PRODUCT INTRODUCE 

1. 4,200Kg (9,259LBS.) lifting capacity.
2. The width between columns is 2850mm, and width of the drive through is 2580mm, it is suitable for most vehicles..
3. Manual safety lock release.
4. Max height limit switch to ensure the cylinders work within the stroke.
5. The width of the column base plate is 500mm, the contact area with the ground is large, and the lift is more stable and reliable.
6. The upper beam maximum height is 3835mm, the usable helght is 3706mm, which is more suitable for the lifting of high-top vehicles.

MAIN FEATURES

1. 4200KG/4500KG lifting capacity, tested to meet 120% dynamic and 150% static load professional test standards.
2. Independent control box, 24V low voltage electrical control system.
3. There are double insurance of manual safety and cable breaking safety inside the cross beam, and the reset device adopts pressure spring and guide bar structure, even if the spring is broken due to the reason of guide bar, it can still be effective to ensure the safety of use.
4. The main structural parts are welded by robot with good welding consistency, high strength and beautiful welding seam.
5. Structural parts are sprayed with imported powder, using imported spraying equipment spraying, high temperature curing, can ensure strong adhesion, bright color and beautiful.
6. Hydraulic cylinders with volume synchronization,to ensure lifting arm synchronization and stable.
7. Equipped with manual descending device in case of power outrage.
8. Equipped with leveling inspection and alarming device, good leveling capability with levelling tolerance adjustable, especially good for 4wheels alignment inspection.
9. Adopting high-quality hydraulic and electrical and electronic components from ltaly, Germany, japan, etc.
10. The position of the steering wheel for the front wheels is adjustable and the extended side sliding plates can adapt to more types of vehiclemodels.
11. With hydraulic safety lock and mechanical spline safety claw system, automatic engaged during descending process, can lock the positionwith mechanic spline safety lock by locking operation, to ensure safety and reliability.
12. Two side manual lock release and 24v low -voltage operation device.
13. Standard with 4 two-stage lifting arms, with fast inserting and adjustable screw-up rubber pads,the minimum height from the ground is only95mm,which is suitable for vehicles with different chassis.
14. The pulley in the column is installed toward the side ofthe cylinder, even if the circlip falls off, it can effectively prevent the puley from faling off of the axis.
15. A device preventing the pulley and steel wire rope from getting off is installed on the top beam ..
16. The slider made from ultra wear-resisting high molecular material with limit plate is used, no filing of lubrication oil needed, the service life is long, the operation is stable and reliable, and the slider can be replaced and adiusted auickly.
17. Aviation wire rope which is soft and with good linearity and small diameter tolerance is adopted to guarantee the synchronization of thecarriage of both sides and satisfies the application requirements better..
18. The hydraulic cylinder connector is equipped with anti-surge valve, which can effectively prevent accidents of oil pipes breaking due to highhydraulic pressure.

OUR FACTORY:  



Warranty term:  

Our products are warranted for one years on equipment structure, to be free of defects in material and workmanship.

 

  Motors, gear box, power units, hydraulic cylinders, and all other assembly components such asturnplates, slip plates,

 

 Cables, chains, valves, switches etc, are warranted for one year against defects in material or workmanship under normal use.

Our Services

We provide the below services.                                                           

1. OEM ODM service.

2. Customized service.

3. One Year Quality warrant service, during the period spare part supplied free

    if you pay for shipping.

4. Professional team supply service for life long time.

FAQ

Buyers may ask ?

 

A: Are you the trade company or factory?

EOUNICE: We are manufacturer and we have our own trade company.So pls don`t worry.

 

B: How long the production can be delivered?

EOUNICE:  Commonly the lead time will be within 15 days after receiving 30% deposit or L/C,

subject to prior sales.This ways based on 1 20FT Containers or 40HQ Container.

 

C: What is the regular color? Can I order special color which I like?

EOUNICE: The regular color is Blue, Red, Yellow.

    Yes, we can also produce machines with special color according to client's request.

 

D: Can I order  in any special size?

EOUNICE:  Yes,you can.

    The size is customized, but should be suitable for the inner size of containers.pls understand.